PB430.001 02-07-95 |0|        Copyright 1991-1995 Packard Bell Electronics

PB430 SYSTEM OVERVIEW NOTE:  This motherboard will accommodate the P24T processor.

01-CPU 
80486SX-25 MHz, 80486SX-33 MHz, 80486DX-33 MHz, 80486DX2-66 MHz 

Keyboard Switchable: 
<Ctrl>-<Alt>-<+> = 25/33/66 MHz 
<Ctrl>-<Alt>-<-> = 8 MHz

LED        SPEED
Amber       8MHz 
Green       25/33/50/66MHz

ODP486SX25 (optional), 487SX-25 (optional), ODP486SX-33 (optional), ODP486DX-33 (optional), 487SX-33 (optional) 



02-BIOS 
128 KB - Phoenix BIOS 
Phoenix 1.01.06E 
Phoenix 1.01.07E (latest)

SETUP <Ctrl>-<Alt>-<S> 



03-RAM MEMORY
Standard on motherboard: 4 MB
Maximum on motherboard : 64 MB
Maximum addressable: 4GB

EMS LIM 4.0 Compatible 
EMS Driver: EMM386.EXE (on DOS disk) 



04-CACHE 
Write back - 8KB upgradeable to 512KB. 



05-INTERFACES 
Parallel : 1 X DB-25 F
Serial : 1 X RS232 DB-9 M
Modem : Proprietary
Game : 15 Pin (Only with CL5424 systems)
VGA : 15-pin
HD Mouse : PS/2
Keyboard : PS/2
FDD Connector: 34 pin on board
HDD Connector: 40-pin IDE 
VESA : 26-pin 



06-VIDEO 
Built-in, Cirrus Logic 5424 or 5428
5424:
512KB expandable to 1MB
1024 x 768 16 colors with 512 KB
640 x 480 16 million colors with 1 MB
VESA support built in to BIOS

5428:
1MB expandable to 2MB
1280 x 1024 16 colors with 1MB
1280 x 1024 256 colors with 2 MB
VESA support built in to BIOS



07-CLOCK/DRIVER 



08-BATTERY 
3.6V DC NiCad soldered on mthbrd 



09-SPEAKER 
Piezoelectric soldered on mthbrd 



10-I/O EXPANSION SLOTS 
PB300 Case 3 X 16-bit ISA
PB400 Case 4 X 16-bit ISA
Mini Tower Case 5 X 16-bit ISA

11-DRIVE CAVITIES 

PB300 Case 1 X 5 1/4" half (exposed) 1 X 3 1/2" half (exposed) 1 X 3 1/2" half (enclosed)

PB400 Case 2 X 5 1/4" half (exposed) 1 X 3 1/2" half (exposed) 1 X 3 1/2" half (enclosed)

Mini Tower Case 2 X 5 1/4" half (exposed) 2 X 5 1/4" half (enclosed) 1 X 3 1/2" half (exposed) 2 X 3 1/2" half (enclosed-over power supply) 



12-FRONT PANEL 
PB430 (PB300 Case)
PWR Button : FLR 
PWR Indicator LED : FLL 
Turbo Indicator LED : FLL

PB440 (PB400 Case)
PWR/Trubo LED : FLL 
PWR Button : FLR 
Turbo Button : FLL 
HDD LED : FLL 
Reset Button : FLL

PB440T (Mini Tower Case) 
PWR Button : FLR 
PWR Indicator LED : FLL 
Turbo Indicator LED : FLL 



13-COVER REMOVAL 
PB430 (PB300 Case) 1 screw front bottom left 1 screw front bottom right

PB440 (PB400 Case) 1 screw back left edge 1 screw back right edge

PB440T (Mini Tower Case) 2 screws rear top 2 screws rear bottom 



14-POWER SUPPLY 
PB430 (PB300 Case) 100 Watts 115V:4A 230V:2A

PB440 (PB400 Case) 150 Watts 115V:4A 230V2A

PB440T (Mini Tower Case) 200 Watts 115V:4A 230V:2A 



15-KEYBOARD 101 Key Enhanced, PS/2 



16-NETWORK CERTIFICATION
PB486DX2-66 / PB440T
- Certified as a File Server and a Workstation

PB486DX2-66 / PB440
- Certified as a File Server and a Workstation

PB486DX2-50 / PB440T
- Certified as a File Server and a Workstation

PB486DX2-50 / PB440
- Certified as a File Server and a Workstation

PB486DX-33 / PB440
- Certified as a Workstation

PB486DX-33 / PB430
- Certified as a Workstation

PB486SX-33 / PB430
- Certified as a Workstation



17-UART COMPATIBILITY 16C450

 


PB430 Index Page

Home Page

Packard-Bell is a trademark of Packard Bell/NEC. This author and the service provider are not affiliated with Packard-Bell/NEC in any way